Apprentice Training, framing & carpentry

Radius Curved Stud Wall Framing

Dual-layer 3/4 in kerfed plywood curved plates (5 ft radius), 2x4 studs at 12 in O.C.

Time: 4 h
People: Two
Level

Before you start

Clear 3.5 × 3 m of floor and lay out the parts.
17 parts and 118 fasteners in 7 steps.
You'll want a claw hammer and a tape measure and a drill and a marker and a spirit level.
Do not space studs wider than 12 in on center; tighter spacing is required to support curved gypsum board.
Secure the curved bottom plate into subfloor joists or concrete anchors at least every 16 in.

Apprentice Training & Risk NoticeEducational training demonstration only. Risk: Real-world structural lumber sizing, spans, and fastener schedules carry legal liability and must comply with local building codes (IRC/IBC/OSHA) and certified engineering.

Apprentice Training, framing & carpentry

Radius Curved Stud Wall Framing

Dual-layer 3/4 in kerfed plywood curved plates (5 ft radius), 2x4 studs at 12 in O.C.

Time: 4 h
People: Two
Level

Before you start

Clear 3.5 × 3 m of floor and lay out the parts.
17 parts and 118 fasteners in 7 steps.
You'll want a claw hammer and a tape measure and a drill and a marker and a spirit level.
Do not space studs wider than 12 in on center; tighter spacing is required to support curved gypsum board.
Secure the curved bottom plate into subfloor joists or concrete anchors at least every 16 in.